GET STARTED

0$

Redirection to the technical assistance portal

HIFU-FINESSE

Troubleshooting manageable by the client

Field Required to Continue

Next Step

1.1 The device does not turn on

The touchscreen display does not light up, it remains disactivated.


Make sure the cable is properly plugged into the machine and into the power outlet.

I solved it, thank you
Field Required to Continue

Next Step

3.1 Inside the cooling circuit there are air bubbles that do not allow the liquid to circulate properly.


I solved it, thank you
Field Required to Continue

Next Step

2.1 The touchscreen display appears to be on

There is no response when typing or selecting commands.


Turn the device off and wait for two minutes. Then turn it back on.

I solved it, thank you
Field Required to Continue

Next Step

3.2 There is not enough liquid inside the cooling circuit.


I solved it, thank you
Field Required to Continue

Next Step

1.2 The device does not turn on

The touchscreen display does not light up, it remains disactivated.


Make sure the cable is working properly by connecting another electronic device.

I solved it, thank you
Field Required to Continue

Next Step

1.3 The device does not turn on

The touchscreen display does not light up, it remains disactivated.


I solved it, thank you
Field Required to Continue

Next Step

1.4 The device does not turn on.

The touchscreen display does not light up, it remains disactivated.


Check the integrity of the fuses with the machine disconnected from the power supply. Open the special compartment located near the power socket. Carefully check that the fuse is not blown or that the wire inside is not broken.

I solved it, thank you
Field Required to Continue

Next Step

2.2 The touchscreen display appears to be on

There is no response when typing or selecting commands.


Make sure there is no external pressure on the display monitor.

I solved it, thank you
Field Required to Continue

Next Step

Flow Alarm

Troubleshooting manageable by the client

Field Required to Continue

Next Step

HANDPIECE SECTION

Field Required to Continue

Next Step

4.1 Transducer cartridge connection error


I solved it, thank you
Field Required to Continue

Next Step

5.1 The transducer cartridge does not emit ultrasound


I solved it, thank you
Field Required to Continue

Next Step

6.1 The transducer cartridge is leaking water


I solved it, thank you
Field Required to Continue

Next Step

4.2 Try a different transducer cartridge


I solved it, thank you
Field Required to Continue

Next Step

5.2 Try a new transducer cartridge


I solved it, thank you
Field Required to Continue

Next Step

5.3 Check for focal points.


Using a thin sheet of plastic, apply a layer of gel to the cartridge window and proceed with scanning a line on the plastic sheet. Check for focal points.

I solved it, thank you
Field Required to Continue

Next Step

5.4 Check for air bubbles.


Examine the transducer emission window, check for air bubbles.

I solved it, thank you
Field Required to Continue

Next Step

The final estimated price is :

Enter your personal details and you will be redirected to the technical assistance portal, where you can open a ticket and be contacted by a Biotec Italia specialist technician
You will be redirected to your personal account Biotec Italia

Summary

Description Information Quantity Price
Discount :
Total :

SUBMIT